Model #27-466, serial #154231
Construction: 4 posts, approximately 4-1/2" diameter each
Stroke: 42"
Daylight opening: 60" (above 4-3/4" thick bolster)

Distance between posts: 50" L-R x 30" F-B
Heated platens: (2) 43-1/2" x 43-1/2", 1800 degrees F.
(9 controllable heat zones per platen)
Bed working area: 50" L-R x 43" F-B
Bed and slide overall: 63" L-R x 43" F-B
Main ram: 8" x 6" @ 6000 PSI
Die cushion: 25.4 tons each, 22" x 43" pad area,
(2) Dayton Rogers Model HC-18-8, air operated.
Bolster: (1) 43" x 50" x 4-3/4" thick
Hydraulics: 10 HP, 1800 RPM, TEFC motor driving Dynex PF-2006 (4.2 GPM)
and Vickers V235-11 (16.4 GPM) pumps, 90 gallon reservoir.
Speeds: Advance 150 IPM; pressing 17 IPM; breakaway 32 IPM, return 188 IPM
Micrion 823 Intelligent Distributed Controller

Approximate overall dimensions:
Base: 8'L-R x 4'F-B
Catwalk with power unit: 108" L-R x 92" F-B
Height: 16' 10"


Approximate weight: 27,200 lbs.

Note: This press was modified and updated with all current technology in 1985

and used in fighter jet research & development for SPF & other hot forming
applications in temperature ranges up to 1,700 DEG. F. Argon gas pressure up
to 500 PSI for both platens, together with 18 different individually
controlled heat zones makes this a very versatile press for all hot forming
applications. This press can be used to form aluminum, titanium and SPF

metals.


Press is capable of this sequence of operations and operation times:
1) Cycle start: 1/3 - 1 second; 2) Rapid advance adjustable stroke up to
150 IPM; 3) High pressure: adjustable stroke up to 17 IPM; 4) Timed hold:
2 - 60 minutes; 5) Decompress: 0 to 60 seconds; 6) Breakaway: 0 to 60

seconds @ 32 IPM; 7) Return: adjustable stroke up to 188 IPM; 8) Cycle ends.

F.O.B. truck, Philadelphia, PA

RETURN to complete inventory display       RETURN to our home page