2400 Ton Hyd.Eng.SPF Press:50"str/DLO,65"x 100"Hot Platens,1100 deg.,1989,up act   Our stock number: 4237

2400 Ton Hyd.Eng.SPF Press:50 str/DLO,65 x 100 Hot Platens,1100 deg.,1989,up act




New 1989

Construction: 4 column type design, up acting
Press Power: 2400 U.S. Tons
Return Power: 245 Tons Maximum
Stroke: 50"
Daylight opening: 50"

Maximum Part Size: 48" Wide x 96" Long x 24" Deep
Heated Platen Size: 65" F-B x 100" L-R
Maximum platen temperature: 1,100 degrees F.

Press Speeds:
Approach, slow mode: 40" (1016mm)/minute
Approach, fast mode: 80" (2032mm)/minute
Blowdown & Stop: .70" (18mm)/second
Creep to Clamp Position .003" (08mm) to .082" (2.1mm)/second
Clamping: 10" (255mm)/minute
Return I: 1.377" (35mm)/second
Return II: .049"(1.1mm)/second
Forming Speeds: 10 Inches Per Minute

Maximum amount of water flow through Heat Exchanger: 200 litre/minute
Maximum Heat Ramp Time: 6 Hr.
Tool Volume: 30 cu. ft. (.849 cu meters) max
Shuttle Platen Travel: 96"
Shuttle Table Travel Rate, In & Out: 4" (100mm)/minute
Argon Gas Pressure: 0 - 600 PSI
Electric System: 480 Volts / 60 Cycle / 3 Phase
Approximate Floor Space Required: L-R 30' 1.5" (9180mm), F-B 30' 6.5"
(9300 mm), Height above floor 19'2.5" (5850mm)
Approximate Weight: 375,000 Lbs.


Equipped with:
4-Column Type Design
(2) 65" F-B X 100" L-R 1100 Deg. F. Heated Platens
Powered Rail bound Carriage System for Lower Cooling Platens, Hot Box Centre

Casting & tooling in & out of press.
Argon Gas System for both top & bottom tooling
Oil Gear Towler Hydraulic System With 1-24 HP Motor & 1-20 HP Motor assembled

on overhead platform on the press head.
PC Computer with Monitor & (2) Printers, on Windows 95 environment
Rack & Pinion Table Leveling System to maintain parallelism between the moving

table & press head during approach & return strokes.

Powered Front & Rear Heat Shields
160 KVA Transformer

Note: New Replacement price is estimated in excess of $4,000,000.00. This

press has performed exceptionally well. Due to management decisions, the

space was needed for other processes. The placing of this press on the

market, creates a great opportunity for your company to manufacture parts

incorporating the latest technology in SPF forming. The immediate

availability, together with the increased demand for SPF type parts makes this

press very justifiable.

F.C.A. (loaded, trucks), Wichita, Kansas





For a quote on this machine, please complete the form below or contact us directly.

Company:
Contact:
Email:
Address:
City St ZIP:
Tel:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page